Half-bath and powder room
A half-bath or powder room, typically just a toilet, sink and vanity, runs 1,500 to 15,000 dollars nationally, with the low end covering a cosmetic refresh and the high end a full gut with new plumbing.[1]
A partial, cosmetic-only makeover of this size can start as low as 2,400 dollars.[2]
The width of that range comes down to one question: does the toilet and sink stay where they are, or does the room need new supply and drain lines to fit them somewhere else.
Full bath
A full bath, with a tub or shower added to the toilet and vanity, runs 3,500 to 20,000 dollars.[1]
A separate national survey puts the average full bathroom remodel at 12,000 dollars, inside a 6,000 to 18,000 dollar range.[2]
Both figures cover the same basic scope: gutting to the studs, new flooring, a new tub or shower, and a new vanity, which is why the two ranges overlap as much as they do.[1],[2]
Upscale primary suite
A general primary bathroom, sized up from a standard full bath but not fully luxury-finished, runs 7,000 to 30,000 dollars.[1]
A large, upscale primary bathroom renovation runs 30,000 dollars and up, with premium finishes pushing some projects past 80,000 dollars.[2]
The jump between those two figures is mostly about finish level, not square footage: stone versus tile, a custom double vanity versus a stock one, a freestanding tub versus a built-in one.
A homeowner choosing between these two tiers is really choosing a finish package, not a bigger room.
Per square foot, if you would rather scale it yourself
Bathroom remodeling costs roughly 70 to 400 dollars or more per square foot, averaging around 120 dollars.[2]
That range is wide because it is carrying the same variables as the tiers above: fixture quality, whether plumbing moves, and how much of the room gets gutted.
A small bathroom at the high end of the per-square-foot range can still land near a large bathroom finished at the low end, which is why size alone is not the whole story.
What pushes a project to the top of its tier
Cost guides consistently point to the same handful of drivers: how much of the layout changes, whether plumbing has to move, and the quality tier of the fixtures and finishes chosen.[1],[2]
Two half-baths with the identical footprint can land at opposite ends of that tier's range depending on which of those three boxes get checked.
Picking the tier that is actually yours
Most projects sit inside one of these three tiers rather than between them. Our calculator above starts from whichever one matches your scope, then adjusts it for your metro's plumber wages.
If you are not sure which tier fits, the safest read is the one that matches your room's current fixture count, not the one that matches your wish list.
You can always move up a tier once you have a real bid in hand; it is harder to walk a signed contract back down to a smaller scope.